DVB-T2 Indoor HDTV Digital TV Antenna | 1080p | 80-Mile Range | 10dB Gain | 3m Cable | F-to-IEC Adapter | 140×240mm | EU, US & Japan | Single, Twin & Amplified

DVB-T2 Indoor HDTV Digital TV Antenna — 1080p | 80-Mile Range | 10dB Gain | 3m Coaxial Cable | F-to-IEC Adapter | 140×240mm | EU, US & Japan Compatible | Single, Twin & Amplified

Cut the cable and receive free digital TV channels in crystal-clear 1080p HD with this DVB-T2 indoor HDTV digital TV antenna. The slim, flat 140×240mm panel design is light, thin, and discreet — mount it on a wall, window, or any flat surface with the adhesive backing in seconds. 80-mile reception range and 10dB gain capture free-to-air digital TV channels across the full DVB-T2 working frequency range (174–240MHz and 470–862MHz). The included F-to-IEC conversion adapter makes it compatible with EU, US, and Japanese TV sets without additional adapters. 3m coaxial cable. Available as single, twin pack, and amplified variants.

Key Features

• 1080p HD Reception | DVB-T2 — Crystal-Clear Free Digital TV: Supports 1080p full HD reception via the DVB-T2 digital broadcast standard — the current standard for free-to-air digital terrestrial television in Europe, the UK, and many other countries. DVB-T2 provides significantly better picture quality, more channels, and more efficient use of broadcast spectrum than the older DVB-T standard. Receive all available free-to-air digital TV channels in your area in full HD without a monthly subscription or cable bill
• 80-Mile Range | 10dB Gain — Strong Signal in Urban & Suburban Areas: The 80-mile reception range and 10dB gain provide strong signal capture for urban, suburban, and many rural locations within range of a digital TV transmitter. The 10dB gain amplifies weak signals from distant transmitters, improving reception reliability in areas with marginal signal strength. The working frequency range of 174–240MHz (VHF Band III) and 470–862MHz (UHF Band IV/V) covers the full DVB-T2 broadcast spectrum used by digital TV transmitters worldwide
• Slim Flat Panel | Adhesive Back — Discreet, Easy Installation: The slim, flat 140×240mm panel is light and thin — designed to sit flush against a wall, window, or flat surface without protruding or looking unsightly. The adhesive-type tearable backing makes installation fast and tool-free — peel, position, and press to mount. For best reception, position the antenna near a window facing the direction of your nearest TV transmitter. The discreet flat panel design blends into any room without the visual intrusion of traditional bulky indoor antennas
• F-to-IEC Adapter | EU, US & Japan Compatible — Universal Connectivity: The included F-male to IEC conversion adapter makes this antenna compatible with TV sets using either F-type coaxial connectors (common in the US and some European sets) or IEC 169-2 connectors (common in European and UK TV sets). The adapter allows easy switching between EU and US/Japan TV connection standards without purchasing additional adapters. The 75Ω impedance matches the standard impedance of all domestic TV coaxial systems for optimal signal transfer
• 3m Coaxial Cable | 75Ω | VSWR ≤1.5 — Low-Loss Signal Transmission: The 3m coaxial cable provides sufficient length to position the antenna at the optimal reception location (near a window or high on a wall) while reaching the TV set. The 75Ω impedance and VSWR ≤1.5 specification ensure low-loss signal transmission from the antenna to the TV — minimising signal degradation along the cable run. The F-male connector provides a secure, reliable connection to the TV or signal adapter
• Single, Twin Pack & Amplified — Flexible Options for Every Setup: Available as a single antenna (for one TV), twin pack (for two TVs or as a spare), and amplified variant (TY23D with built-in signal amplifier — ideal for locations with weaker signal strength or longer cable runs). The amplified variant boosts the received signal before it reaches the TV, improving reception reliability in marginal signal areas. The Black variant features a black panel finish for discreet installation in darker room environments

Specifications

• Standard: DVB-T2
• Resolution: 1080p HD
• Range: Up to 80 miles
• Gain: 10dB
• Working Frequency: 174–240MHz (VHF) / 470–862MHz (UHF)
• Impedance: 75Ω
• VSWR: ≤1.5
• Coaxial Cable: 3m, F-male connector
• Adapter: F-male to IEC (EU/US/Japan)
• Panel Size: 140 × 240mm
• Packed Size: 250 × 160 × 23mm
• Mounting: Adhesive back (peel and stick)

Variant Guide

• Black (single): Single black panel antenna
• 2pc Black: Twin pack, black panel
• TY22 (single): Single antenna, standard model TY22 (verify colour/finish with supplier)
• 2pc TY22: Twin pack, TY22 model
• TY13 (single): Single antenna, model TY13 (verify colour/finish with supplier)
• TY23D with Amplifier: Single antenna with built-in signal amplifier — ideal for weak signal areas

In the Box

• 1 or 2 × DVB-T2 Indoor TV Antenna (as selected)
• 1 × 3m coaxial cable
• 1 × F-to-IEC adapter

⚠️ Note: Select your preferred variant before adding to cart. DVB-T2 reception requires a DVB-T2 compatible TV or set-top box — verify your TV supports DVB-T2 before purchasing. For best reception, position the antenna near a window facing your nearest TV transmitter. Signal strength varies by location, distance from transmitter, and local obstructions. The amplified TY23D variant requires a USB power source for the amplifier — verify with supplier. Verify the exact colour and finish for TY13 and TY22 variants with supplier.