Instant Electric Hot Water Heater Faucet | 3000W | Stainless Steel Liner | CNC Auto | 0.04–0.6MPa | 55°C | Rotatable Single Handle | 50–80L/hr | 1.5kg | Kitchen & Bathroom

Instant Electric Hot Water Heater Faucet — 3000W | Stainless Steel Liner | CNC Fully Automatic | 0.04–0.6MPa | 55°C | Rotatable Single Handle | 50–80L/hr | 1.5kg | Kitchen & Bathroom

Get instant hot water at the tap with this instant electric hot water heater faucet. The 3000W heating element heats water on demand as it flows through the stainless steel liner — delivering hot water within seconds of turning on the tap, with no waiting for a tank to heat up and no energy wasted keeping a tank warm. CNC fully automatic control manages the heating process automatically. The rotatable single-handle design provides smooth, ergonomic control of both water flow and temperature. Compatible with water pressure from 0.04 to 0.6MPa. 50–80L/hr hot water yield. Maximum temperature 55°C. 20×20×20cm, 1.5kg.

Key Features

• 3000W Instant Heating — Hot Water in Seconds, No Tank Required: The 3000W heating element heats water on demand as it flows through the unit — delivering hot water within seconds of turning on the tap without waiting for a storage tank to heat up. Instant (tankless) water heaters are significantly more energy-efficient than storage tank heaters because they only heat water when needed, eliminating the standby heat loss that accounts for a significant portion of storage heater energy consumption. Ideal for kitchens and bathrooms where instant hot water access is needed without the space or cost of a storage water heater
• Stainless Steel Liner — Hygienic, Corrosion-Resistant Water Contact: The stainless steel liner provides a hygienic, corrosion-resistant water contact surface that does not leach metals, plastics, or contaminants into the heated water. Stainless steel is the preferred material for water heater liners due to its durability, corrosion resistance, and food-safe properties. The stainless steel liner maintains water quality and extends the service life of the heating element by resisting scale build-up and corrosion from mineral-rich water
• CNC Fully Automatic Control — Precise, Reliable Operation: CNC (Computer Numerical Control) fully automatic control manages the heating process automatically — activating the heating element when water flow is detected and deactivating it when flow stops. The automatic control eliminates the need for manual heating activation and ensures the heating element is never powered without water flowing through it, preventing dry-fire damage. The fully automatic operation makes this faucet safe and convenient for daily use
• Rotatable Single Handle | Single Hole — Ergonomic & Easy to Install: The rotatable single-handle design provides smooth, ergonomic control of water flow and temperature with one hand. The single-hole installation requires only one hole in the sink or countertop, making installation straightforward and compatible with most standard kitchen and bathroom sink configurations. The rotatable spout allows the water stream to be directed precisely where needed
• 0.04–0.6MPa Water Pressure | 50–80L/hr — Wide Pressure Compatibility: The wide 0.04–0.6MPa operating pressure range is compatible with most domestic water supply systems — from low-pressure gravity-fed systems (water tower or well supply) to standard mains pressure. Note: the heating device is pressure-activated — a minimum water pressure of 0.04MPa is required to activate the heating element. If your water supply is gravity-fed from a tank or well with very low pressure, verify adequate pressure before purchasing. Hot water yield of 50–80L/hr at standard pressure
• 55°C Maximum Temperature | Plastic Shell — Safe, Comfortable Hot Water: The 55°C maximum output temperature provides comfortably hot water for handwashing, dishwashing, and general kitchen and bathroom use without scalding risk at normal flow rates. The plastic shell is lightweight (1.5kg total), easy to clean, and resistant to the humid bathroom and kitchen environment. The compact 20×20×20cm footprint fits under most standard kitchen and bathroom sinks without requiring significant cabinet space

Important Installation & Safety Notes

• ⚠️ Always fill with water before powering on — never power on the unit without water flowing through it
• Install vertically — do not install upside-down
• Turn on cold water first, then power on — on first use
• After use, run cold water briefly before switching off to cool the heating element
• Minimum water pressure 0.04MPa required to activate heating — not suitable for very low-pressure gravity-fed systems
• Professional plumbing and electrical installation by a qualified tradesperson is strongly recommended
• Verify electrical certifications (CE, RoHS, electrical safety) with supplier before installation

Specifications

• Type: Instant electric water heater faucet
• Heating Power: 3000W
• Liner Material: Stainless steel
• Shell Material: Plastic
• Control: CNC fully automatic
• Handle: Single handle, single hole, rotatable
• Water Pressure: 0.04–0.6MPa
• Hot Water Yield: 50–80L/hr
• Max Temperature: 55°C
• Heat Tubes: 55
• Dimensions: 20 × 20 × 20cm
• Net Weight: 1.5kg
• Inlet Mode: Lower water / side inlet
• Energy Efficiency: Level 4

In the Box

• 1 × Instant Electric Hot Water Heater Faucet
• 1 × Installation instruction manual
• Mounting hardware (verify with supplier)

⚠️ Important: This is a 3000W mains-powered electrical appliance. Professional installation by a qualified electrician and plumber is strongly recommended. Verify that your home’s electrical circuit can support 3000W continuous load before installation. Verify all electrical safety certifications (CE, RoHS, etc.) with supplier. Not suitable for water supply systems with pressure below 0.04MPa. Always power off before performing any maintenance or cleaning.